OS-317 Spray Cleaner
Acidic cleaner for inner layer pre-cleaning. Non-etching. Good cleaning for fingerprints and shop soils. Free rinsing. Contains no chlorides. Will not release chlorine gas if mixed with microetch solutions.
Products
OS-304 Acid Cleaner
OS-304 Acid Cleaner is an extremely free rinsing cleaner for removal of chromates, fingerprints, shop soils, and oxides from copper and copper alloys. OS-304 is non etching, removing oxides with little or no attack on basis metal. It contains no chelating agents or other ingredients that complicate waste treatment. Dry films and primary image screening resists are not attacked by OS-304 solutions.
OS-303 Acid Cleaner
Non-etching soak cleaner for use prior to pattern plating. Free rinsing. Low use cost. Excellent cleaning of fingerprints and shop soils. Non-chelated. Easy to waste treat. (Must follow with microetch to remove adhesion promoter)
OS-303 TDS
SC-5 Glycol Ether-Ester Screen Cleaner
SC-5 Screen Cleaner is a specialty blend of esters used to clean screens. This material will remove solder masks, legend inks and primary image inks. This product is free of chlorinated solvents and is classified as non-hazardous. SC-5 Screen Cleaner is distillable and fuel blend able. This product has a high flash point, excellent solvency, low vapor pressure and is biodegradable.
SC-4 Screen Cleaner with Orange Oil
SC-4 Screen Cleaner is a specialty blend of esters used to clean screens. SC-4 has the added benefit of the powerful solvent in orange oil. This material will remove solder masks, legend inks and primary image inks. This product is free of glycol ethers (“butyls”) and chlorinated solvents. This product is classified as non-hazardous. SC-4 Screen Cleaner is distillable and fuel blend able. This product has a high flash point, excellent solvency and a low vapor pressure. Further; it is biodegradable.
SC-3 Biodegradable Screen Cleaner
SC-3 Screen Cleaner is a specialty blend of esters used to clean screens. This material will remove solder masks, legend inks and primary image inks. This product is free of glycol ethers (“butyls”) and chlorinated solvents. SC-3 is classified as non-hazardous. SC-3 Screen Cleaner is distillable and fuel blend able. This product has a high flash point, excellent solvency and a low vapor pressure. Further; it is biodegradable.
SC-15 Glycol Ether based Screen Cleaner
SC-15 Screen Cleaner is a specialty blend of esters used to clean screens. SC-15 has the added benefit of the powerful solvent in orange oil. This material will remove solder masks, legend inks and primary image inks. This product is free of chlorinated solvents. This product is classified as non-hazardous. SC-15 Screen Cleaner is distillable and fuel blend able. This product has a high flash point, excellent solvency and a low vapor pressure. Further; it is biodegradable.
EC-4 Highly Concentrated Equipment Cleaner
EC-4 Equipment Cleaner is a highly concentrated cleaning solution for developing, etching and stripping machines. It will remove a variety of contaminants such as residues from dry film photo resists, solder masks, dyes and anti-foams. A regular maintenance program using EC-4 will insure maximum efficiency from equipment with consistent high quality product and minimum down time.
EC-2 Highly Concentrated Equipment Cleaner
EC-2 Equipment Cleaner is a highly concentrated cleaning solution for developing, etching and stripping machines. It will remove a variety of contaminants such as residues from dry film photo resists, solder masks, dyes and anti-foams. A regular maintenance program using EC-2 will insure maximum efficiency from equipment with consistent high quality product and minimum down time.