Product Line

2
Yes
None
1
20
Search...
/products/
Thumbnail

Categories:

Sub-Categories:

Alt Names:

87 products«1 of 5»
PCB Fabrication Chemicals
OS-473 Hard Water Tolerant Developer
OS-473 Hard Water Tolerant Developer Image

OS-473 is a 35% carbonate solution used to develop semi-aqueous and aqueous dry films as well as liquid or dry film photoimageable solder masks. Water with hardness in excess of 300 ppm (as CaCO3) can be used with OS-473 without the formation of water scale. This greatly reduces the need for maintenance of the spray equipment.

OS-473 TDS

OS-490 Hard Water Tolerant Developer
OS-490 Hard Water Tolerant Developer Image

OS-490 is a more concentrated version of OS-473 utilizing only Potassium Carbonate to develop semi-aqueous and aqueous dry films as well as liquid or dry film photoimageable solder masks. OS-490 uses the same cleaning agent used in OS-473.

OS-490 TDS

OS-444 Hard Water Tolerant Concentrate
OS-444 Hard Water Tolerant Concentrate Image

OS-444 is a concentrated developer solution utilizing pH booster which offers extended life to the developer. OS-444 offers 3 times the life versus the OS-490 developer solution.

OS-444 TDS

BB-200 Petroleum Based Defoamer
BB-200 Petroleum Based Defoamer Image

BB-200 is a blend of polyglycol acid ester and a hydrophobic silica in a hydro-treated heavy naphthenic distillate that is used to control foam over a wide pH range (2-12) for both photo-resist developing and stripping operations. BB-200 additions should be diluted with process solution before adding to the sump. This is to ensure adequate dispersion of the defoamer in solution.

BB-200 TDS

BB-300 Polymer Based Defoamer
BB-300 Polymer Based Defoamer Image

BB300 is a blend of polyoxyethylene and polyoxypropylene copolymers that is used to control foam over a wide pH range (2-12) for both photo-resist developing and stripping operations. BB300 additions should be diluted with process solution before adding to the sump. This is to ensure adequate dispersion of the de-foamer in solution.

BB-300 TDS

BB-330 Low Cost Polymer Based Defoamer
BB-330 Low Cost Polymer Based Defoamer Image

BB330 is a blend of polyoxyethylene and polyoxypropylene copolymers that is used to control foam over a wide pH range (2-12) for both photo-resist developing and stripping operations. BB330 additions should be diluted with process solution before adding to the sump. This is to ensure adequate dispersion of the de-foamer in solution.

BB-330 TDS

OS-419 Non-Silicone Defoamer
OS-419 Non-Silicone Defoamer Image

OS 419 is a non silicone defoamer specifically formulated for controlling foam in dry film developing baths and in stripping baths for dry films and alkaline inks. It is also useful for controlling foam in post cleaning systems after solder reflow. OS 419 provides long lasting foam control at low concentrations. Because of its low use concentration, OS 419 is inexpensive to use.

OS-419 TDS

OS-429 Non-Silicone Defoamer
OS-429 Non-Silicone Defoamer Image

OS-429 is a non silicone defoamer specifically formulated for controlling foam in dry film developing baths and in stripping baths for dry films and alkaline inks. It is also useful for controlling foam in post cleaning systems after solder reflow. OS-429 provides long lasting foam control at low concentrations. Because of its low use concentration, OS-429 is inexpensive to use.

OS-429 TDS

RS-5000 Non-VOC Resist Stripper
RS-5000 Non-VOC Resist Stripper Image

RS-5000 resist stripper is a Non-VOC aqueous solution formulated to strip aqueous dry film photoresist and alkaline soluble screen printing inks. RS-5000 contains no volatile organic carbon components to eliminate emission by exhaust. RS-5000 has copper brightening agents to give a uniform clean copper appearance. RS-5000 has excellent stripping capacity and a rapid strip rate for high-speed horizontal applications. RS-5000 can also be used in a batch mode. As RS-5000 becomes saturated with resist, it may become necessary to add a suitable de-foamer such as BB-200 or BB-300.

RS-5000

RS-6040 Highly Concentrated Resist Stripper
RS-6040 Highly Concentrated Resist Stripper Image

RS-6040 Resist Stripper is an aqueous solution formulated to strip aqueous dry film photo-resist and alkaline soluble screen printing inks. RS-6040 contains copper brightening agents for a uniform clean copper appearance. RS-6040 has excellent stripping capacity and a rapid strip rate for high-speed horizontal applications. RS-6040 can also be used in a batch mode. There are anti-tarnish additives that inhibit copper attack to facilitate A.O.I inspection. As RS-6040 becomes saturated with resist, it may become necessary to add a suitable defoamer such as BB-200.

RS-6040 TDS

RS-7000 All Purpose Resist Stripper
RS-7000 All Purpose Resist Stripper Image

RS-7000 Resist Stripper is a formulated to strip aqueous dry film photoresist. It contains anti-tarnish agents designed to protect both aluminum and copper surfaces. RS-7000 can also be used in a batch mode. As RS-7000 becomes saturated with resist, it may become necessary to add a suitable defoamer such as BB-300.

RS-7000 TDS

OS-902 Glycol Ether Based Stripper
OS-902 Glycol Ether Based Stripper Image

Glycol ether based stripper for outers that is great for removing resist from tight spaces & over-plated areas.

OS-902 TDS

OS-987 Resist Stripper
OS-987 Resist Stripper Image

OS-987 Resist Stripper is a highly concentrated product designed to remove aqueous dry film resists and alkaline processible screening inks. It is very economical because it is used at a lower concentration than most competitive resist strippers. OS-987 may be used in dip or spray operations. It contains anti oxidants to retard attack on copper and tin/lead and keep parts bright for ease of inspection after stripping.

OS-987 TDS

RS-3150 Dry Film Stripper
RS-3150 Dry Film Stripper Image

RS-3150 Resist Stripper is a solution formulated to strip semi-aqueous dry film photo-resist and alkaline soluble screen printing inks. RS3150 contains copper brightening agents for a uniform clean copper appearance. RS-3150 has excellent stripping capacity and a rapid strip rate for high-speed horizontal applications. RS3150 can also be used in a batch mode. As
RS-3150 becomes saturated with resist; it may become necessary to add a suitable de-foamer such as BB-300.

In addition, RS-3150 can also be used as a fully cured solder mask remover. RS-3150 will not attack the butter coat or the metals of the printed circuit board. Concentration and temperature should be adjusted according to technical data sheet.

RS-3150 TDS

OS-953 LPI/Dryfilm Soldermask Remover
OS-953 LPI/Dryfilm Soldermask Remover Image

OS-953 LPI/Dry Film Solder Mask Remover is an aqueous, alkaline liquid designed to remove fully cured dry film solder mask and most photoimageable solder masks from printed circuit boards. OS-953 removes solder mask with much shorter exposure time than most competitive products. Solder mask is removed without damaging the circuitry or epoxy laminate.

OS-953 TDS

LPI950 C-20 Solder Mask
LPI950 C-20 Solder Mask Image

LPI950 C-20 solder mask is a two component Liquid Photo-imageable (LPI) solder mask manufactured by Sanwa Chemical.

LPI950 C-20 TDS

LPI950 C-8 Solder Mask
LPI950 C-8 Solder Mask Image

LPI950 C-8 solder mask is a two component Liquid Photo-imageable (LPI) solder mask manufactured by Sanwa Chemical.

LPI950 C-8 TDS

LPI950 LC-1 Solder Mask
LPI950 LC-1 Solder Mask Image

LPI950 LC-1 LPI solder mask is a two component Liquid Photoimageable (LPI) solder mask manufactured by Sanwa Chemical.

LPI950 LC-1 TDS

MUV-1000 UV-Curable Legend Ink
MUV-1000 UV-Curable Legend Ink Image

MUV-1000 Series UV curable marking ink is a one component UV curable marking ink manufactured by Sanwa Chemical.

MUV-1000 TDS

SM-530 Thermal-Curable Legend Ink
SM-530 Thermal-Curable Legend Ink Image

SM-530 series thermal curable marking ink is a two component thermal curable marking ink comprised of solid and liquid epoxy resins.

SM-530 TDS

87 products«1 of 5»
87 products«1 of 5»
PCB Fabrication Chemicals
OS-473 Hard Water Tolerant Developer Image
OS-473 Hard Water Tolerant Developer
OS-473 is a 35% carbonate solution used to develop semi-aqueous and aqueous dry films as well as liquid or dry film photoimageable solder masks. Wa... Read More
OS-490 Hard Water Tolerant Developer Image
OS-490 Hard Water Tolerant Developer
OS-490 is a more concentrated version of OS-473 utilizing only Potassium Carbonate to develop semi-aqueous and aqueous dry films as well as liquid ... Read More
OS-444 Hard Water Tolerant Concentrate Image
OS-444 Hard Water Tolerant Concentrate
OS-444 is a concentrated developer solution utilizing pH booster which offers extended life to the developer. OS-444 offers 3 times the life versus... Read More
BB-200 Petroleum Based Defoamer Image
BB-200 Petroleum Based Defoamer
BB-200 is a blend of polyglycol acid ester and a hydrophobic silica in a hydro-treated heavy naphthenic distillate that is used to control foam ove... Read More
BB-300 Polymer Based Defoamer Image
BB-300 Polymer Based Defoamer
BB300 is a blend of polyoxyethylene and polyoxypropylene copolymers that is used to control foam over a wide pH range (2-12) for both photo-resist ... Read More
BB-330 Low Cost Polymer Based Defoamer Image
BB-330 Low Cost Polymer Based Defoamer
BB330 is a blend of polyoxyethylene and polyoxypropylene copolymers that is used to control foam over a wide pH range (2-12) for both photo-resist ... Read More
OS-419 Non-Silicone Defoamer Image
OS-419 Non-Silicone Defoamer
OS 419 is a non silicone defoamer specifically formulated for controlling foam in dry film developing baths and in stripping baths for dry films an... Read More
OS-429 Non-Silicone Defoamer Image
OS-429 Non-Silicone Defoamer
OS-429 is a non silicone defoamer specifically formulated for controlling foam in dry film developing baths and in stripping baths for dry films an... Read More
RS-5000 Non-VOC Resist Stripper Image
RS-5000 Non-VOC Resist Stripper
RS-5000 resist stripper is a Non-VOC aqueous solution formulated to strip aqueous dry film photoresist and alkaline soluble screen printing inks. R... Read More
RS-6040 Highly Concentrated Resist Stripper Image
RS-6040 Highly Concentrated Resist Stripper
RS-6040 Resist Stripper is an aqueous solution formulated to strip aqueous dry film photo-resist and alkaline soluble screen printing inks. RS-6040... Read More
RS-7000 All Purpose Resist Stripper Image
RS-7000 All Purpose Resist Stripper
RS-7000 Resist Stripper is a formulated to strip aqueous dry film photoresist. It contains anti-tarnish agents designed to protect both aluminum an... Read More
OS-902 Glycol Ether Based Stripper Image
OS-902 Glycol Ether Based Stripper
Glycol ether based stripper for outers that is great for removing resist from tight spaces & over-plated areas. ... Read More
OS-987 Resist Stripper Image
OS-987 Resist Stripper
OS-987 Resist Stripper is a highly concentrated product designed to remove aqueous dry film resists and alkaline processible screening inks. It is ... Read More
RS-3150 Dry Film Stripper Image
RS-3150 Dry Film Stripper
RS-3150 Resist Stripper is a solution formulated to strip semi-aqueous dry film photo-resist and alkaline soluble screen printing inks. RS3150 cont... Read More
OS-953 LPI/Dryfilm Soldermask Remover Image
OS-953 LPI/Dryfilm Soldermask Remover
OS-953 LPI/Dry Film Solder Mask Remover is an aqueous, alkaline liquid designed to remove fully cured dry film solder mask and most photoimageable ... Read More
LPI950 C-20 Solder Mask Image
LPI950 C-20 Solder Mask
LPI950 C-20 solder mask is a two component Liquid Photo-imageable (LPI) solder mask manufactured by Sanwa Chemical. ... Read More
LPI950 C-8 Solder Mask Image
LPI950 C-8 Solder Mask
LPI950 C-8 solder mask is a two component Liquid Photo-imageable (LPI) solder mask manufactured by Sanwa Chemical. ... Read More
LPI950 LC-1 Solder Mask Image
LPI950 LC-1 Solder Mask
LPI950 LC-1 LPI solder mask is a two component Liquid Photoimageable (LPI) solder mask manufactured by Sanwa Chemical. ... Read More
MUV-1000 UV-Curable Legend Ink Image
MUV-1000 UV-Curable Legend Ink
MUV-1000 Series UV curable marking ink is a one component UV curable marking ink manufactured by Sanwa Chemical. ... Read More
SM-530 Thermal-Curable Legend Ink Image
SM-530 Thermal-Curable Legend Ink
SM-530 series thermal curable marking ink is a two component thermal curable marking ink comprised of solid and liquid epoxy resins. ... Read More
87 products«1 of 5»

Can’t find what you’re looking for? Reach out to us!